Clamping force is spread evenly over the whole contact surface. The workpiece is not distorted by pressure and stays fully open, so the entire machining operation can be finished in one setup.
Electro-Permanent Magnetic Circuit
- Power is used only at the moment of switching. Once the chuck reaches the “ON” or “OFF” position it holds that state with no power applied.
- No heat is generated during use, which keeps performance stable.
- Pallets and cube fixtures can be loaded and unloaded freely — a very flexible setup.
- Clamping force is not lost if the power fails, giving the highest level of safety.
Specifications
Standard sizes are listed in the table. Special sizes can be made to order, and two heights are available: 58 mm and 68 mm. Get in touch for details.
| Model | Width B | Length L | Height H | No. of Poles |
|---|---|---|---|---|
| SC50-3033 | 300 | 330 | 58 | 16 |
| SC50-3040 | 400 | 58 | 20 | |
| SC50-3049 | 490 | 58 | 24 | |
| SC50-3649 | 360 | 490 | 58 | 30 |
| SC50-3664 | 640 | 58 | 40 | |
| SC50-3679 | 790 | 58 | 50 | |
| SC50-3694 | 940 | 58 | 60 | |
| SC50-36109 | 1090 | 58 | 70 | |
| SC50-3737 | 370 | 370 | 58 | 25 |
| SC50-4234 | 420 | 340 | 58 | 24 |
| SC50-4249 | 490 | 58 | 36 | |
| SC50-4264 | 640 | 58 | 48 | |
| SC50-4279 | 790 | 58 | 60 | |
| SC50-4294 | 940 | 58 | 72 | |
| SC50-42109 | 1090 | 58 | 84 | |
| SC50-4834 | 480 | 340 | 58 | 28 |
| SC50-4849 | 490 | 58 | 42 | |
| SC50-4864 | 640 | 58 | 56 | |
| SC50-4879 | 790 | 58 | 70 | |
| SC50-4894 | 940 | 58 | 84 | |
| SC50-48109 | 1090 | 58 | 98 | |
| SC50-6034 | 600 | 340 | 58 | 36 |
| SC50-6049 | 490 | 58 | 54 | |
| SC50-6064 | 640 | 58 | 72 | |
| SC50-6079 | 790 | 58 | 90 | |
| SC50-6094 | 940 | 58 | 108 | |
| SC50-60109 | 1090 | 58 | 123 |
