For mould steels and alloy steels, including pre-hardened steel, alloy steel and cast iron, in the HRC 30 to 55 range, from imported carbide rod with UNICO coating.
- Designed for mould and alloy steels, HRC 30 to 55
- Imported carbide rod
- UNICO coating
The range covers square end mills in standard, anti-vibration unequal-helix, high-helix, long-flute, long-shank, roughing, long-neck, long-neck and taper versions; ball nose end mills in standard, long-shank, long-neck, taper and tapered-neck versions; and corner radius end mills in standard, high-helix and long-shank versions. Dimensions are listed in the size table below.
| Series | Code No . | Ø Range | P | M | K | N | S | H |
|---|---|---|---|---|---|---|---|---|
| Carbide square end mill – Standard – 2 flute | EPSFC2, EPSSC2 | Ø0.2~Ø25 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – Standard – 3 flute | EPSFC3, EPSSC3 | Ø1~Ø25 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – Standard – 4 flute | EPSFC4, EPSSC4 | Ø1~Ø25 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – Anti-vibration unequal helix – 4 flute | EPSSD4 | Ø5~Ø16 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – High helix – 4 flute | EPSFH4, EPSSH4 | Ø3~Ø16 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – Long flute – 4 flute | EPSCC4 | Ø3~Ø25 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – High helix – 6 flute | EPSSH6, EPSCH6 | Ø6~Ø16 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – Long shank – 2 flute | EPSLC2, EPSMC2 EPSNC2 | Ø4~Ø20 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – Long shank – 4 flute | EPSLC4, EPSMC4 EPSNC4 | Ø3~Ø20 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – Roughing – 4 flute | EPSRR4 | Ø6~Ø20 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – Long neck – 2 flute | EPSBC2, EPSRC2 | Ø0.2~Ø12 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – Long neck – 4 flute | EPSBC4, EPSRC4 | Ø1~Ø12 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – Taper – 2 flute | EPSFT2, EPSST2 | Ø1~Ø10 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide ball nose end mill – Standard – 2 flute | EPBFC2, EPBSC2 | 0.1R~10R | ✓ | ✓ | ✓ | ✓ | ||
| Carbide ball nose end mill – Standard – 4 flute | EPBFC4, EPBSC4 | 1R~10R | ✓ | ✓ | ✓ | ✓ | ||
| Carbide ball nose end mill – Long shank – 2 flute | EPBLC2, EPBMC2 EPBNC2 | 1.5R~10R | ✓ | ✓ | ✓ | ✓ | ||
| Carbide ball nose end mill – Long shank – 4 flute | EPBLC4, EPBMC4 EPBNC4 | 2R~8R | ✓ | ✓ | ✓ | ✓ | ||
| Carbide ball nose end mill – Long neck – 2 flute | EPBBC2, EPBRC2 | 0.15R~6R | ✓ | ✓ | ✓ | ✓ | ||
| Carbide ball nose end mill – Taper – 2 flute | EPBFT2, EPBST2 | 1R~3R | ✓ | ✓ | ✓ | ✓ | ||
| Carbide ball nose end mill – Tapered neck – 2 flute | EPBRT2 | 0.5R~2R | ✓ | ✓ | ✓ | ✓ | ||
| Carbide corner radius end mill – Standard – 2 flute | EPCSC2 | Ø4~Ø12 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide corner radius end mill – Standard – 4 flute | EPCSC4 | Ø1~Ø12 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide corner radius end mill – High helix – 4 flute | EPCSH4 | Ø3~Ø12 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide corner radius end mill – Long shank – 4 flute | EPCLC4 | Ø4~Ø16 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide corner radius end mill – Long neck – 2 flute | EPCBC2, EPCRC2 | Ø1~Ø12 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide corner radius end mill – Long neck – 4 flute | EPCBC4, EPCRC4 | Ø2~Ø12 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide corner radius end mill – Tapered neck – 2 flute | EPCRT2 | Ø1~Ø6 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide inner radius end mill – 2 / 4 flute | EPIFA2, EPISA2 EPIFA4, EPISA4 | 0.5R~6R | ✓ | ✓ | ✓ |
