For machining very hard materials up to about HRC 70, from imported ultra-fine carbide rod, intended for high-speed machining. SICO and NACO coatings are available.
- Designed for hard materials, about HRC 70
- Imported ultra-fine carbide rod
- Suited to high-speed machining
- SICO and NACO coatings available
The range covers square end mills in high-helix 6 and 8 flute and high-helix short-flute 4, 6 and 8 flute versions, ball nose end mills in low-helix short-flute 2 flute, and corner radius end mills in high-feed straight-flute 4 flute and straight short-flute 4 flute versions. Dimensions are listed in the size table below.
| Series | Code No . | Ø Range | P | M | K | N | S | H |
|---|---|---|---|---|---|---|---|---|
| Carbide square end mill – High helix – 6 flute | EHSSS6 | Ø6~Ø14 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – High helix – 8 flute | EHSSS8 | Ø16~Ø20 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – High helix short flute – 4 flute | EHSPS4, EHSUS4 | Ø1~Ø5 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – High helix short flute – 6 flute | EHSUS6 | Ø6~Ø12 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – High helix short flute – 8 flute | EHSUS8 | Ø16~Ø20 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide ball nose end mill – Low helix short flute – 2 flute | EHBPS2, EHBUS2 | 0.5R~8R | ✓ | ✓ | ✓ | ✓ | ||
| Carbide corner radius end mill – High feed straight flute – 4 flute | EHCUK4 | 0.5R~2R | ✓ | ✓ | ✓ | |||
| Carbide corner radius end mill – Straight short flute – 4 flute | EHCPS4, EHCUS4 | Ø1~Ø12 | ✓ | ✓ | ✓ | ✓ |
