For hard and high-precision machining in the HRC 50 to 65 range, from imported ultra-fine carbide rod, for both accuracy and high metal removal rates. SICO-TH coating is standard.
- Designed for hard materials and precision work, HRC 50 to 65
- Imported ultra-fine carbide rod
- Suited to high-precision and high-efficiency machining
- SICO-TH coating
Square end mills come in standard and long-shank versions, ball nose end mills in standard, long-shank and short-flute versions, and corner radius end mills in standard and long-shank versions. Dimensions are listed in the size table below.
| Series | Code No . | Ø Range | P | M | K | N | S | H |
|---|---|---|---|---|---|---|---|---|
| Carbide square end mill – Standard – 4 flute | EHSFF4, EHSSF4 | Ø1~Ø12 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide square end mill – Long shank – 4 flute | EHSLF4, EHSMF4 EHSNF4 | Ø4~Ø12 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide ball nose end mill – Standard – 2 flute | EHBFF2, EHBSF2 | 0.5R~6R | ✓ | ✓ | ✓ | ✓ | ||
| Carbide ball nose end mill – Long shank – 2 flute | EHBLF2, EHBNF2 EHBMF2 | 2R~6R | ✓ | ✓ | ✓ | ✓ | ||
| Carbide ball nose end mill – Short flute – 2 flute | EHBPF2, EHBUF2 | 0.5R~6R | ✓ | ✓ | ✓ | ✓ | ||
| Carbide corner radius end mill – Standard – 4 flute | EHCSF4 | Ø3~Ø12 | ✓ | ✓ | ✓ | ✓ | ||
| Carbide corner radius end mill – Long shank – 4 flute | EHCLF4, EHCMF4 EHCNF4 | Ø4~Ø12 | ✓ | ✓ | ✓ | ✓ |
